Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Natali Monge-

Modifica approvata da Natali Monge

Prima di
Dopo il
Invariato

Righe Passo

[* black] Things are about to heat up. For this step you will need to utilize a heat gun. Make sure to get heat-resistant gloves (oven mitts not recommended) so you don't burn yourself
[* black] Make sure to place the phone on a surface that will not catch fire or melt.
[* black] With your heat gun and gloves on, slowly and evenly heat the edges of the back glass plate.
[* black] As heat is applied, do not linger too long on one spot. The heat gun can damage device if left on one section for a long period of time. Apply the heat evenly, testing if the adhesive is soft enough to use the jimmy to separate the back glass panel from the device.
-[* black] As you separate the panel from the device, use
+[* black] As you separate the panel from the device, use the picks to hold the panel apart from the device.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione