Modifiche al passo #5
Modifica di Kristen Gismondi —
Modifica approvata da Kristen Gismondi
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] Remove the |
|---|---|
| - | [* icon_note] Two of the screws must be removed with sliding mechanism in the forward position. Another two must be removed with the sliding mechanism in the back position. |
| + | [* red] Remove the eleven 8mm and two 10mm Phillips head screws from the left side of the blaster, and carefully remove the outer casing. |
| + | [* icon_note] Two of the screws must be removed with the sliding mechanism in the forward position. Another two must be removed with the sliding mechanism in the back position. |
| [* icon_caution] There are several springs that may become displaced during this procedure. Proceed with the utmost caution. |