Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il

Righe Passo

[* black] Lift the free end of the SD board to clear the plastic optical drive fan body, then pull it away from the edge of the outer case case to clear the two mounting pins.
+[* icon_reminder] When reinstalling the SD board, first position its right edge on the pins molded into the right side of the outer case. Then carefully push the SD board down into its recess, being careful not to break and SMD components off the board's left edge.