Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Remove the following six screws securing the heat sink to the logic board:
+[* black] Remove the following five screws securing the heat sink to the logic board:
[* red] Four 6.4 mm T8 Torx screws
[* orange] One 4.3 mm T10 Torx screw
[* icon_note] It may be necessary to hold the socket with a Phillips screwdriver on one side of the board while you unscrew the Torx screw on the other side of the board.