Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Walter Galan-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Disconnect the heat sink thermal sensor from its socket on the logic board.
-[* icon_caution] Make sure to pull the connector upwards out of its socket and not parallel to the face of the logic board.
+[* black] Lift the heat sink thermal sensor connector straight up out of its socket on the logic board.
+[* icon_caution] Make sure to pull only on the connector and not the socket itself.