Skip to main content

Modifiche al passo #12

Modifica in base a Richdave-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] The CCLF tube assemblies are made up of a U shaped reflector with 2ea individual tubes inside. The entire assembly is 455mm long and 7mm wide. There are no part numbers on the assembly however there is a SineS on the end with the wires attached and an 18 on the other end.
[* black] The individual tubes are 437mm long (excluding the terminalsterminals as best as I can tell) and are about 2mm diameter. More accurate measurements can be taken if/when removed from the reflector assembly
[* icon_note] The CCFL reflectors are a tight fit over the sides of the perspex sheet and the other layers of plastic. Patience and a plastic spudger or pry tool will get you there
[* black] The CCLF tube assemblies are made up of a U shaped reflector with 2ea individual tubes inside. The entire assembly is 455mm long and 7mm wide. There are no part numbers on the assembly however there is a SineS on the end with the wires attached and an 18 on the other end.
[* black] The individual tubes are 437mm long (excluding the terminalsterminals as best as I can tell) and are about 2mm diameter. More accurate measurements can be taken if/when removed from the reflector assembly
[* icon_note] The CCFL reflectors are a tight fit over the sides of the perspex sheet and the other layers of plastic. Patience and a plastic spudger or pry tool will get you there