Salta al contenuto principale

Modifiche al passo #12

Modifica in base a Richdave-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] The CCLF tube assemblies are made up of a U shaped reflector with 2ea individual tubes inside. The entire assembly is 455mm457mm long and 7mm7.6mm wide. There are no part numbers on the assembly however there is a S on the end with the wires attached and an 18 on the other end.
[* icon_caution] The 2 CCFL tubes are held together with a plastic clipfigure 8 rubber band in the middle of the reflector so it would appear both tubes must come out at the same time (I can sense a new guide coming)time.
[* black] The individual tubes are 437mm448mm long (excluding the terminals as best as I can tell- standard way to measure is end of glass to end of glass) and are about 2mm2.4mm diameter. More accurate measurements can be taken if/when removed from the reflector assembly
[* icon_note] It appears theThe CCFL are soldered to the wires so not a simple plug in replacement
[* black] The CCLF tube assemblies are made up of a U shaped reflector with 2ea individual tubes inside. The entire assembly is 455mm457mm long and 7mm7.6mm wide. There are no part numbers on the assembly however there is a S on the end with the wires attached and an 18 on the other end.
[* icon_caution] The 2 CCFL tubes are held together with a plastic clipfigure 8 rubber band in the middle of the reflector so it would appear both tubes must come out at the same time (I can sense a new guide coming)time.
[* black] The individual tubes are 437mm448mm long (excluding the terminals as best as I can tell- standard way to measure is end of glass to end of glass) and are about 2mm2.4mm diameter. More accurate measurements can be taken if/when removed from the reflector assembly
[* icon_note] It appears theThe CCFL are soldered to the wires so not a simple plug in replacement
[* icon_caution] The CCFL are '''EXTREMELY''' fragile so ensure you dont break them when installing them.
[* icon_note] The CCFL reflectors are a tight fit over the sides of the perspex sheet and the other layers of plastic. Patience and a plastic spudger or pry tool should get you there
[* icon_note] Initial research suggests that BF24438-24B LAMPThe closest I can find to my CCFL 1400V 2.4MM X 437MMmeasurements are either the [http://www.ccflwarehouse.com/24x44fuspcc.html|446mm x 2.4mm] or the [http://www.ccflwarehouse.com/24x45fuspcc.htmll|450mm x 2.4mm] so I'd suggest the 446mm is a likely replacement.used
[* icon_reminder] See the [guide|5865|Removing CCFL from iMac 20in LCD CCFL assembly] guide for details
[* icon_note] Initial research suggests that BF24438-24B LAMPThe closest I can find to my CCFL 1400V 2.4MM X 437MMmeasurements are either the [http://www.ccflwarehouse.com/24x44fuspcc.html|446mm x 2.4mm] or the [http://www.ccflwarehouse.com/24x45fuspcc.htmll|450mm x 2.4mm] so I'd suggest the 446mm is a likely replacement.used
[* icon_reminder] See the [guide|5865|Removing CCFL from iMac 20in LCD CCFL assembly] guide for details

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto