Skip to main content

Modifiche al passo #8

Modifica in base a Richdave-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] blankGently flip the PCB over 180deg so it is off the aluminum back panel.
[* icon_caution] Be '''CAREFUL''' not to damage the 8 flex cables
[* icon_note] The PCB may be attached to the aluminium by some adhesive near the LVDS connector. IF so use a plastic pry tool or spudger to '''GENTLY''' lift the PCB up
[* black] blankGently flip the PCB over 180deg so it is off the aluminum back panel.
[* icon_caution] Be '''CAREFUL''' not to damage the 8 flex cables
[* icon_note] The PCB may be attached to the aluminium by some adhesive near the LVDS connector. IF so use a plastic pry tool or spudger to '''GENTLY''' lift the PCB up

Immagine 1

Nessuna immagine precedente

Aggiunto