Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Richdave-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Now gently separate the metal bezel from the main body of the LCD panel
[* black] Lay the LCD panel down on with viewing side UP and remove the metal bezel
[* icon_caution] Make sure you are careful when removing the bezel from the TOP edge as you will be exposing the 8 flex cables mentioned in step 1.
[* orange] Note the 3 flex tabs on the left edge
[* icon_caution] Do not damage any of the tabs or flex cables as these are the Row and Column Drivers. DamagedDamage to these will will cause faults like vertical/horizontal lines or white screen etc.
[* icon_caution] Do not damage any of the tabs or flex cables as these are the Row and Column Drivers. DamagedDamage to these will will cause faults like vertical/horizontal lines or white screen etc.
[* icon_caution] '''WARNING''' - Once the bezel is removed the LCD is LOOSE in the black plastic frame - only held in by the small gasket underneath.