Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #1

Modifica in base a Richdave-

In attesa di approvazione


Righe Passo

[* black] Follow this guide to remove the LCD panel [guide|998]
[* icon_reminder] The rest of this procedure should be done in the cleanest possible work environment to avoid dust getting '''BEHIND''' the LCD (I learned this the HARD way!)
[* black] Once the LCD panel is removed you need to peel back the black foil from the top edge of the LCD to reveal the clear plastic PCB protector.
[* icon_caution] Now gently peel the clear plastic PCB protector off the top edge. Make sure you don't damage the flex cables attached to the PBC you are exposing.
[* yellow] There are a total of 8 flex cables along the top edge