Salta al contenuto principale

Modifiche al passo #3

Modifica in base a faorazem-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove the following 4 screws:
[* red] Three 1.8 mm Phillips #00 screws securing the headphone jack and GPS antenna to the rear panel. Note that the head of the middle screw is smaller in diameter. Also make note of the washer underneath the ribbon cable secured by the rightmost screw.
[* red] Three 1.8 mm Phillips #00 screws securing the headphone jack and GPS antenna to the rear panel. Note that the head of the middle screw is smaller in diameter. Also make note of the washer underneath the ribbon cable secured by the rightmost screw.
[* orange] One 3.8 mm Phillips #00 screw in the plastic loop near the headphone jack.