Salta al contenuto principale

Modifiche al passo #1

Modifica in base a cheongi-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Remove the two Phillips #00 screws securing the on/off switch to the front bezel.
[* black] When replacing, check the protrusion of the switch. There is a small plastic spacer adhered to the inside of button which may come off with cleaning. Without a spacer, the button may not protrude enough to be depressed. If lost, it can be replaced with a suitable thickness of stiff plastic (eg shirt box lid).