Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #14

Modifica in base a Alberto-

Modifica approvata da Evan Noronha

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector.
[* redicon_caution] Be ''very'' careful not to snag the tiny grounding clip on the side of the case when prying up the logic board; it breaks easily.easily! If you have signal problems after removing the logic board, check this ground tab.
[* icon_note] If the board won't lift up, double check to make sure all the8 screws securing the logic board have been removed.
[* redicon_caution] Be ''very'' careful not to snag the tiny grounding clip on the side of the case when prying up the logic board; it breaks easily.easily! If you have signal problems after removing the logic board, check this ground tab.
[* icon_note] If the board won't lift up, double check to make sure all the8 screws securing the logic board have been removed.