Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione


Modifiche al passo #14

Modifica in base a ctjuggler-

Modifica rifiutata da David Hodson

Prima di
Dopo il

Righe Passo

[* black] There is a small golden grounding tab on logic board adjacent to the 'do not remove sticker'. Use a small slot screw driver or something similar to unhook the end of the tab from the case.
[* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector.
[* black] Be VERY careful the grounding tab does not snag on the side of the case when prying up the logic board; it breaks easily. If you have signal problems after removing the logic board, check this ground tab.
[* icon_note] If the board won't lift up, double check to make sure all the screws securing the logic board have been removed.