Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #14

Modifica in base a Alberto-

Modifica approvata da Evan Noronha

Prima di
Dopo il
Invariato

Righe Passo

[* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector.
[* icon_caution] There is a small golden grounding tab on the logic board adjacent to the 'Do not remove' sticker. Be ''very'' careful this does not to snag the tiny grounding clip on the side of the case when prying up the logic board; it breaks easily! If you have signal problems after removing the logic board, check this ground tab.
[* icon_caution] There is a small golden grounding tab on the logic board adjacent to the 'Do not remove' sticker. Be ''very'' careful this does not to snag the tiny grounding clip on the side of the case when prying up the logic board; it breaks easily! If you have signal problems after removing the logic board, check this ground tab.
[* icon_note] If the board won't lift up, double check to make sure all 8 screws securing the logic board have been removed.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Eliminato