Modifiche al passo #2
Modifica in base a Miroslav Djuric-
- Prima di
- Dopo il
- Invariato
Righe Passo
[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly. |
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly. |
[* black] Insert a metal spudger into the seam between the silver front bezel and the black display assembly on the edge closest to the home button. Gently pry the display assembly up from its bezel. |
Immagine 1
Nessuna immagine precedente.
Aggiunto