Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a Eric Essen-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.
[* icon_caution] Be very careful when opening the iPhone so that the cables under the display are not severed.
[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
[* black] Insert a metal spudger intoicon_note] If the seam between the silver front bezel and the black display assembly onis to damaged to allow the edge closestsuction cup to the home button. Gently pry the display assembly up from its bezeladhere, tape with a strong adhesive such as duct tape maybe used.
[* black] Insert a metal spudger intoicon_note] If the seam between the silver front bezel and the black display assembly onis to damaged to allow the edge closestsuction cup to the home button. Gently pry the display assembly up from its bezeladhere, tape with a strong adhesive such as duct tape maybe used.

Immagine 1

Vecchia Versione

Nuova Versione