Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #14

Modifica in base a Luke Soules-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Slide the logic board towards the dock connector and out of the iPhone.
[* black] When replacing the logic board after installing battery, make sure to set the top section of the logic board (where the simSIM tray is) in place before settling the rest of the board in place. This is important, as sometimes the simSIM card slot will not align into place. Once the top section is in place, the bottom section will have a small bit jutting that can be wiggle / maneuvered into place. You will know the logic board is correctly installed when the simSIM tray is aligned with the opening in the iphoneiPhone case and the camera module seats neatly into its place.
[* black] When replacing the logic board after installing battery, make sure to set the top section of the logic board (where the simSIM tray is) in place before settling the rest of the board in place. This is important, as sometimes the simSIM card slot will not align into place. Once the top section is in place, the bottom section will have a small bit jutting that can be wiggle / maneuvered into place. You will know the logic board is correctly installed when the simSIM tray is aligned with the opening in the iphoneiPhone case and the camera module seats neatly into its place.