Salta al contenuto principale

Modifiche al passo #10

Modifica in base a Sam Goldheart-

Modifica approvata da Sam Goldheart

Eliminato
Aggiunto
Invariato

Righe Passo

[* yellow] Use a spudger to disconnect the ribbon cable labeled "6."
[* icon_note] If you have an iPhone 3GS, refer to the second picture and use a spudger to disconnect the ribbon cable labeled "7."
[* icon_note] Be certain that the connectors on the ribbon cables are perfectly aligned with the sockets on the mother board before applying pressure. This may require a magnifying glass or jewelers' loupe.