Modifiche al passo #14
Righe Passo
| [title] Create spot for 3-way switch | |
| + | [* icon_caution] Caution. By cutting this flange (and drilling the holes in the next step), you will defeating a safety feature of this unit. In the case of internal leaks, or a water spill by the filler neck, water may now not be captured by the deck, and would be able to flow down onto the electronics area. |
| + | [* icon_note] If you wish to retain the water retainment safety feature, install the 3-way switches differently, or use switchless fans. |
| [* black] The 3-way switch will be positioned so that you can use a pencil point poked through the grill to change the setting after your ChiliCube is re-assembled. | |
| [* black] You can use a dremel tool to cut part of the flange surrounding the deck. Position the switch and mark, it will be just behind the grill on the front-side of the cube when it is upright. |