Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Jeff Suovanen-

Modifica approvata da Jeff Suovanen

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use the tip of a spudger to pryflip up the display data cable lock and rotate it toward the DC-InMagSafe 2 power port side of the computer.
[* black] Use the tip of a spudger to pryflip up the display data cable lock and rotate it toward the DC-InMagSafe 2 power port side of the computer.
[* black] Pull the display data cable straight out of its socket on the logic board.
[* [* icon_caution] Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.
[* icon_caution] Do not touch the contacts on the data connector or its socket with your fingers or any tools, as you may deposit oils or damage the pins.
[* [* icon_caution] Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.
[* icon_caution] Do not touch the contacts on the data connector or its socket with your fingers or any tools, as you may deposit oils or damage the pins.