Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #1

Modifica in base a Kelsea Weber-

Modifica approvata da Kelsea Weber

Prima di
Dopo il
Invariato

Righe Passo

[* black] Gently flip the sensor cover back to expose the single screw attaching the sensor cover to the ribbon cable.
[* black] Use a Phillips00 screwdriver to remove the 3mm screw from the sensor cover.
[* black] Use tweezers to remove the metal contact
cover.
[* icon_caution] The eleven gold screwslens contacts lying beneath the ribbon cable become loose when the 3mm screw isand contact cover are removed. Be careful when removing the sensor so the gold screws do not fall out of place.
[* black] Gently flip the sensor cover back to expose the single screw attaching the sensor cover to the ribbon cable.
[* black] Use a Phillips00 screwdriver to remove the 3mm screw from the sensor cover.
[* black] Use tweezers to remove the metal contact
cover.
[* icon_caution] The eleven gold screwslens contacts lying beneath the ribbon cable become loose when the 3mm screw isand contact cover are removed. Be careful when removing the sensor so the gold screws do not fall out of place.