Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #1

Modifica in base a Kelsea Weber-

Modifica approvata da Kelsea Weber

Prima di
Dopo il
Invariato

Righe Passo

[* black] FlipGently flip the sensor cover back to expose the single screw holding itattaching the cover to the sensor mountribbon cable.
[* black] Use a Phillips00 screwdriver to remove the 3mm screw from the cover
.
[* icon_caution] 11The eleven gold screws lying beneath the ribbon cable become loose when the 3mm screw is removed. Be careful when removing the sensor so the gold screws are loosedo not fall out of place.
[* black] FlipGently flip the sensor cover back to expose the single screw holding itattaching the cover to the sensor mountribbon cable.
[* black] Use a Phillips00 screwdriver to remove the 3mm screw from the cover
.
[* icon_caution] 11The eleven gold screws lying beneath the ribbon cable become loose when the 3mm screw is removed. Be careful when removing the sensor so the gold screws are loosedo not fall out of place.