Modifiche al passo #8
Modifica di Claudio Felix —
Modifica approvata da Claudio Felix
- Prima di
- Dopo il
- Invariato
Righe Passo
| [title] Remove flat cable from back casing | |
| [* blue] Carefully lift the back casing from the camera's body from left to right. | |
| - | [* red] Locate the |
| + | [* red] Locate the connector which holds the flat cable to the circuit board attached to the back casing. Unlock the connector by gently pulling its black piece from the side the flat cable comes into it. |
| [* orange] Pull the flat cable from the connector and then you'll have completely removed the back casing from the camera. Note I taped each screw to the removed back casing, so I don't loose or mix any of them. |