Salta al contenuto principale

Modifiche al passo #3

Modifica in base a fadi abboud-

Modifica approvata da fadi abboud

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_caution] Have a second person lift the scanner as you lift the end ofCarefully separate the two hood attached topieces connected by the scanner by a black ribbon cable. '''This cable cannot be removed easily, do not to remove it.'''ribbon.
[* icon_caution] Have a second person lift the scanner as you lift the end ofCarefully separate the two hood attached topieces connected by the scanner by a black ribbon cable. '''This cable cannot be removed easily, do not to remove it.'''ribbon.
[* black] Set the piece of the hood down such that no stress is applied to the scanner as it is attached by ribbon cable.
[* icon_note] The printer hood should now be in 2 pieces.