Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Justin Cogan-

Modifica approvata da Justin Cogan

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_cautionred] With the screw removed, separate the two pieces of the hood by lifting the top piece vertically as shown.it vertically.
[* icon_caution]
'''Only lift the the top piece enough so that there is no tension applied to the ribbon cables shown.'''
[* black] Theorange] Carefully pull down the white ribbon cable is attached only to onethrough the top piece of the hood, so simply pull it through(downward) the non-attached end as shownhood.
[* icon_cautionred] With the screw removed, separate the two pieces of the hood by lifting the top piece vertically as shown.it vertically.
[* icon_caution]
'''Only lift the the top piece enough so that there is no tension applied to the ribbon cables shown.'''
[* black] Theorange] Carefully pull down the white ribbon cable is attached only to onethrough the top piece of the hood, so simply pull it through(downward) the non-attached end as shownhood.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione