Skip to main content

Modifiche al passo #4

Modifica in base a codyduncum-

Modifica rifiutata da Jake Devincenzi

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Temporarily put the LCD back into the body of the iPad 2 and remove the front panel, being careful not to damage the digitizer cable in the process.
[* red] If you are replacing the front panel with a new one, make sure to transfer over the metal camera bracket and the home button assembly. Both can be removed using a spudger and heat.
[* black] On the new front panel, there is a small strip with two holes attached to the digitizer cable. It is ok to remove that before installation.