Salta al contenuto principale

Modifiche al passo #8

Modifica in base a mayer-

In attesa di approvazione


Righe Passo

[* black] Hold the display with one hand while removing the screws from the left hinge mount.
[* black] Remove the following 3 screws from the left hinge mount:
[* red] One 7.2 mm smaller diameter Phillips from the right side.
[* orange] One 5.2 mm larger diameter Phillips from the middle.
[* yellow] One 10 mm Phillips from the left side.
[* black] Lift the left hinge mount with plastic piece out of the computer.
[* black] Check that the cables on the right are not trapped under other cables.