Modifiche al passo #8
Modifica in base a iRobot-
- Eliminato
- Aggiunto
- Invariato
Righe Passo
| [* black] Hold the display with one hand while removing the screws from the left hinge mount. |
| [* black] Remove the following 3 screws from the left hinge mount: |
| [* red] One 6 mm smaller diameter Phillips from the right side. |
| [* orange] One 6 mm larger diameter Phillips from the middle. |
| [* yellow] One 10 mm Phillips from the left side. |
| [* black] Lift the left hinge mount out of the computer. |
Immagine 1
Nessuna immagine precedente.
Aggiunto