Salta al contenuto principale

Modifiche al passo #6

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Disconnect the three antenna cables from the Airport card, and the black inverter cable from the logic board.
[* icon_note] The inverter cable connector may be covered by a small piece of foam tape. Remove this cube before disconnecting the connector.
[* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn, there are only two antenna cables and the black inverter cable is in a different location.

Immagine 2

Vecchia Versione

Nuova Versione