Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Matthew Theiss-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackyellow] Unscrew the two screws still holding the button contact panel onto the camera.
[* blackorange] Using the Spudger, disconnect the ribbon attaching the button contact panel to the logic board. This is located at the bottom of the button contact panel, if holding the camera right-side up and looking at the camera's back (the side where the LCD screen usually is).
[* blackyellow] Unscrew the two screws still holding the button contact panel onto the camera.
[* blackorange] Using the Spudger, disconnect the ribbon attaching the button contact panel to the logic board. This is located at the bottom of the button contact panel, if holding the camera right-side up and looking at the camera's back (the side where the LCD screen usually is).
[* black] Gently pull the button contact panel away from the logic board.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione