Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #5

Modifica in base a Justin Cogan-

Modifica approvata da Justin Cogan

Prima di
Dopo il
Invariato

Righe Passo

[* black] To access and remove the forth and final screw attaching the hood of the printer, the face for the power button needs to first be removed as follows:
[* yellowred] Reach into the mouth of the printer and press on the small clip behind the power button. This will enable the face of the power button to be removed.
[* black] To access and remove the forth and final screw attaching the hood of the printer, the face for the power button needs to first be removed as follows:
[* yellowred] Reach into the mouth of the printer and press on the small clip behind the power button. This will enable the face of the power button to be removed.
[* icon_note] A picture of the power button removed is provided to show the location of the clip that needs to be pressed.
[* black] After pressing the clip, pull out the face of the power button: right side to left side.

Immagine 2

Vecchia Versione

Nuova Versione