Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #5

Modifica in base a Joseph Camilleri-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] To access and remove the final screw attaching the hood of the printer, the face for the power button needs to first be removed.removed as follows:
[* blackyellow] Reach in tointo the mouth of the printer and press on the small clip behind the power button. This will enable the face of the power button to be removed.
[* blackicon_note] A picture of the power button removed is provided to show the location of the clip that needs to be pressed.
[* black] To access and remove the final screw attaching the hood of the printer, the face for the power button needs to first be removed.removed as follows:
[* blackyellow] Reach in tointo the mouth of the printer and press on the small clip behind the power button. This will enable the face of the power button to be removed.
[* blackicon_note] A picture of the power button removed is provided to show the location of the clip that needs to be pressed.
[* black] After pressing the clip, pull out the face of the power button: right side to left side.

Immagine 2

Vecchia Versione

Nuova Versione