Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #7

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] A singleUpon successfully drilling out all the screw heads, the outer case slides right off the transmitter/receiver assembly.
[* black] The two modules can be split apart to examine their circuits.
[* icon_note] The small blue wire connects the GPS
antenna cable is connected to the backside of one ofGPS receiver board.
[* black] After disconnecting
the motherboardsGPS board, we can take a closer look at both components.
[* black] A singleUpon successfully drilling out all the screw heads, the outer case slides right off the transmitter/receiver assembly.
[* black] The two modules can be split apart to examine their circuits.
[* icon_note] The small blue wire connects the GPS
antenna cable is connected to the backside of one ofGPS receiver board.
[* black] After disconnecting
the motherboardsGPS board, we can take a closer look at both components.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente.

Aggiunto