Modifiche al passo #1
Modifica di Mikinna Martin —
Modifica approvata da Mikinna Martin
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* red] Locate Hard Drive. | |
| - | [* orange] Remove the two 3mm screws from Hard Drive. |
| - | [* yellow] Disconnect wire attached to the system board. |
| - | [* green] Remove tape tab from Hard Drive. |
| + | [* orange] Remove the two 3mm screws from Hard Drive with the Phillips #0 head. |
| + | [* yellow] Disconnect wire attached to the system board by lifting up the tape. |
| + | [* green] Remove tape tab from Hard Drive by lifting the tape up and off of the Hard Drive unit. |