Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert wisdom hereUse a small flathead screwdriver to rotate the CPU lock 180 degrees counter-clockwise.
[* icon_caution] Do not try to rotate the lock more than 180 degrees.
[* black] Lift the CPU straight up from its socket.
[* icon_caution] When installing a new CPU, be sure the small gold triangle in one corner of the new CPU is in the same position as the old CPU.
[* icon_note] Before installing the CPU heat sink, be sure to apply a new layer of [guide|744|thermal paste]
.
[* black] Insert wisdom hereUse a small flathead screwdriver to rotate the CPU lock 180 degrees counter-clockwise.
[* icon_caution] Do not try to rotate the lock more than 180 degrees.
[* black] Lift the CPU straight up from its socket.
[* icon_caution] When installing a new CPU, be sure the small gold triangle in one corner of the new CPU is in the same position as the old CPU.
[* icon_note] Before installing the CPU heat sink, be sure to apply a new layer of [guide|744|thermal paste]
.

Immagine 1

Vecchia Versione

Nuova Versione