Skip to main content

Modifiche al passo #17

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert wisdom herePull the right edge of the logic board slightly away from the rear case to dislodge the rear I/O ports from their bezel.
[* black] Tilt the top edge of the board away from the rear case and lift the logic board assembly out of the rear case, minding any cables that may get caught.
[* icon_reminder] When reinstalling the logic board, it is helpful to use tape to temporarily tuck the cables out of the way until the board is properly seated in the rear case
.
[* black] Insert wisdom herePull the right edge of the logic board slightly away from the rear case to dislodge the rear I/O ports from their bezel.
[* black] Tilt the top edge of the board away from the rear case and lift the logic board assembly out of the rear case, minding any cables that may get caught.
[* icon_reminder] When reinstalling the logic board, it is helpful to use tape to temporarily tuck the cables out of the way until the board is properly seated in the rear case
.