Modifiche al passo #2
Modifica di Travis Mangum —
Modifica approvata da Travis Mangum
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* black] Once the back panel has been removed, it is best to set it aside in a safe location. |
|---|---|
| + | [* black] Locate the microphone. With the tablet facing down, the rear camera should be at the top of the tablet. The microphone is in the top right corner. |
| + | [* black] Using the black spudger, insert the point underneath the red and black wires. Gently lift the microphone out of its socket. |
| + | [* black] Where the red and black wires connect to the motherboard, use a soldering iron to remove the defective microphone. |
| + | [* icon_note] If you have removed the microphone and cannot remember which wire went where, don't worry. The wire terminals on the motherboard are marked with a {br} " + " and " - " sign. |
Immagine 1
Nessuna immagine precedente.
Aggiunto