Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Stuart Smith-

Modifica approvata da Jeff Suovanen

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Open the ZIF connector, the black locker part over the wire ribbon in the motherboard and remove the wire ribbon which connects the motherboard and the camera.
-[* icon_note] The camera is located on the top left above the motherboard.
-[* icon_caution] The camera is usually covered with tape or material. Remove them and peel the camera off with tweezers for safety.
+[* black] Open the ZIF connector, the black locker part over the wire ribbon in the motherboard, and remove the wire ribbon that connects the motherboard and the camera.
+[* icon_note] The camera is located on the top left, above the motherboard.
+[* icon_caution] The camera is usually covered with tape or material. Remove it, and peel the camera off with tweezers for safety.