Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Zihao Fu-

Modifica approvata da Zihao Fu

Prima di
Dopo il
Invariato

Righe Passo

-[* black] The camera is located on the top left above the motherboard. Peel the camera off with tweezers for safety.
-[* icon_caution] The camera is usually covered with tape or material. Remove them carefully.
+[* black] Open the ZIF connector, the black locker part over the wire ribbon in the motherboard and remove the wire ribbon which connects the motherboard and the camera.
+[* icon_note] The camera is located on the top left above the motherboard.
+[* icon_caution] The camera is usually covered with tape or material. Remove them and peel the camera off with tweezers for safety.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione