Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Richard Suovanen-

Modifica approvata da Richard Suovanen

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Using the plastic opening tool, carefully pull up the rubber grip around the port side of the camera.
[* black] Remove the four different sized screws located beneath the rubber grip.
[* icon_note [* red] 6 mm Phillips #PH00 screw in RED,screw.
[* orange]
3.4 mm Phillips #PH00 screw in ORANGE,screw.
[* yellow]
3.9 mm Phillips #PH00 screw in YELLOW, andscrew.
[* green]
2.2 mm Phillips #PH00 screw in GREENscrew.
[* icon_note [* red] 6 mm Phillips #PH00 screw in RED,screw.
[* orange]
3.4 mm Phillips #PH00 screw in ORANGE,screw.
[* yellow]
3.9 mm Phillips #PH00 screw in YELLOW, andscrew.
[* green]
2.2 mm Phillips #PH00 screw in GREENscrew.