Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Nathan McKinney-

Modifica approvata da Nathan McKinney

Prima di
Dopo il
Invariato

Righe Passo

-[* black] If Step 4 was done correctly, the board should dislodge from the corner mold. (See picture for reference)
-[* red] Once the corner has been popped out, the rest of the board can be removed by pulling up.
-[* blue] Lastly, the small narrow end of the board will need to be pulled horizontally towards the corner. This should completely free the board from the panel with the exception of the connector. (See image)
+[* black] If Step 4 was done correctly, the board should dislodge from the corner mold.
+[* red] The rest of the board can now be removed by pulling up.
+[* blue] Pull the small narrow end of the board horizontally towards the corner, freeing the board from the panel with the exception of the connector.