Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Nathan McKinney-

Modifica approvata da Nathan McKinney

Prima di
Dopo il
Invariato

Righe Passo

-[* black] There are two #000 headed, 3 mm long screws under a similar cover covering the Micro SD slot on the top side of the device.
-[* red] Remove the two screws beneath the Micro SD card slot cover.
+[* black] Locate and open the Micro SD slot on the top side of the device.
+[* red] Remove the two screws located beneath the cover.