Salta al contenuto principale

Modifiche al passo #2

Modifica in base a maciek wolf-

Modifica rifiutata da Adam O'Camb

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Disconnect the camera cable from the logic board.
[* icon_caution] Pull the cable parallel to the face of the logic board. Pulling the cable upward may damage the logic board or the cable itself.
[* icon_caution] You can walk the connector off by putting pressure on the the tiny "handles" on left and right sides.

Immagine 2

Nessuna immagine precedente.

Aggiunto