Modifiche al passo #9

Modifica in base a Ryan Kirkpatrick-

Modifica approvata da Ryan Kirkpatrick

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Apply mixture over the foam. Do not worry about overflowing slightly onto the board as this will be sanded off. However, do try to avoid runs.
[* black] Allow mixture and hour and a half to cure.
[* black] Repeat on other side of board.
[* blackicon_note] You may want to place a piece of tape towards the rail to stop the resin from flowing over the rail. We will glass the rail in the next step.
[* blackicon_note] You may want to place a piece of tape towards the rail to stop the resin from flowing over the rail. We will glass the rail in the next step.