Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Alexander Frederiks-

Modifica approvata da Evan Noronha

Prima di
Dopo il
Invariato

Righe Passo

[* red] Use a pair of tweezers to disconnect the three black antenna cables from the motherboard.
-[* black] Use the flat end of the spudger tool to carefully pry up the motherboard.
+[* black] Use the flat end of the spudger tool to carefully pry up the motherboard. For the first Shield there is a flatribbon at the right side underneath the board, this is for the Stylus. At the left side there are 2 flatribbons for the cameras underneath the board, so loosen the cameras before lifting the board.