Storia Andis Master Clippers Motor/Coil Assembly Replacement Passo n. 1

Modifiche al passo #1

Modifica di alex — 7 apr 2016

Modifica approvata da alex

	[* icon_caution] Caution: Make sure the clippers are unplugged from any *electrical* outlets before beginning teardown.
-	[* red] Using the Philips screwdriver, unscrew the two housing cover screws indicated ~~to expose the inner parts~~.
+	[* red] Using the Philips screwdriver, unscrew the two housing cover screws indicated.
	[* yellow] using the Philips screwdriver, unscrew the two mounting screws indicated, holding down the *Coil Assembly*.
-	[* icon_reminder] keep track of appropriate washers with each screw
+	[* icon_reminder] Reminder: keep track of appropriate washers with each screw
	[* orange] Using the Philips screwdriver, remove the *switch installment screw *indicated.