Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Tom Brandolini-

Modifica approvata da Jake Devincenzi

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Pull up on the exposed clear plastic tab to peel the battery off the adhesive securing it to the iPhone.
[* black] Depending on the strength of the adhesive holding the battery down, the adhesive's strength may exceed the strength of the plastic pull-tab. If so it will be necessary to work the plastic spudger around the battery to release the adhesive. Too much pressure exerted at any one point could short the battery internally rendering it useless.
[* black] Remove the battery.
[* icon_note] Do not remove the plastic tab from the iPhone.