Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a Richard Gonzalez-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Reorient the camera so it is upright and you are looking at the back screen.
[* blackred] Remove the rubber covers on the 2 screws in the upper and lower right side corners. Insert spudger and push rubber forward. Gently grabcovers out from sockets. Grab the rubbers with the tweezers and set aside. Remove both of the screws revealed.
[* blackorange] Remove the screw in the lower left corner which resides under the sliding battery cover.
[* blackred] Remove the rubber covers on the 2 screws in the upper and lower right side corners. Insert spudger and push rubber forward. Gently grabcovers out from sockets. Grab the rubbers with the tweezers and set aside. Remove both of the screws revealed.
[* blackorange] Remove the screw in the lower left corner which resides under the sliding battery cover.
[* icon_note] When removing the screw in the lower left corner, you may need to gently pry open the casing to dislodge the screw.

Immagine 2

Vecchia Versione

Nuova Versione