Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Nestor Trevino-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Undo the grey clip that holds the LCD ribbon in place by loosening one side of the clip with the plastic opening tool, then gently separate the other side of the clip from the holder.
[* icon_note] The redcopper end of the ribbon should slide out of the housing as you pull the LCD up and away from the motherboard.
[* icon_caution] Using too much force may bend the copper ribbon.
[* icon_note] The redcopper end of the ribbon should slide out of the housing as you pull the LCD up and away from the motherboard.
[* icon_caution] Using too much force may bend the copper ribbon.